Name: Subaru 2.5L DOHC Turbo Enhanced Short Block (2008+ STi Only)
SKU: SUB-SHORT-EJ25-TURBO-1
Availability: InStock

Description

ENHANCED SUBARU SHORT BLOCK

Here at Sunwest, we take pride in the Subaru engines that we build. Our engines are built to exceed the quality and performance of one from the factory by addressing the main causes of failure in Subarus: rod and/or rod bearing failure, oil consumption and head gasket failure. We are proactive by taking preventative measures to ensure that our motors outlast any other.

This package includes:

– NPR Teflon coated, Hyper-Eutectic Pistons and rings

– King XPG Performance Bearings for Rods AND Mains (addresses rod bearing failure)

– Rods are reconditioned and resized to tighter tolerances (addresses Subaru’s known rod failure)

– New pin bushings are installed

– OEM Subaru Nitrated Crankshaft

Machine Work Done:

– Engines are cleaned, all bolt holes checked and repaired if needed

– Surfaces are checked and milled

– Blocks are honed with deck plates to mimic the cylinder distortion of an assembled motor (addresses oil blow by)

– Blocks are bored and honed with a computer controlled diamond hone down to .0005″ clearance (addresses piston slap)

– Deck Surface is milled on a CBN Rottler Machine

NOTE: ***CUSTOM REBUILD***. WE NEED YOUR SHORT BLOCK CORE TO BUILD (PLEASE CALL FOR LEAD TIME)

Please Note: Warranty is voided with the installation of any aftermarket part that alters the performance of the engine or requires alteration to the engine’s ECU. For turbo motors, your oil cooler MUST be replaced to validate warranty (they cannot be flushed). The turbo must also be thoroughly flushed or replaced. Similar to the cams on SOHC, metal shavings settle in these areas and if not properly cleaned, will send metal right back into the new engine.

We also have new parts available including: oil pumps, water pumps, timing kits, gasket sets, oil cooler and turbos. Give us a call today!