Subaru 2.5L SOHC Enhanced Long Block Engine (2005 ONLY)
$2,995.00
-
SHIPPING INFO: These are shipped via LTL Freight. We can ship to a commercial address or we can find terminal near you or to residential. *Must call for special residential rates; amounts can vary. (See Freight Estimates tab or call with any questions.)
Description
2005 ENHANCED SOHC SUBARU LONG BLOCK
Here at Sunwest, we take pride in the Subaru engines that we build. Our engines are built to exceed the quality and performance of one from the factory by addressing the main causes of failure in Subarus: rod and/or rod bearing failure, oil consumption and head gasket failure. We are proactive by taking preventative measures to ensure that our motors outlast any other.
This package includes:
05 EJ25 SOHC DUAL EXH PORTS 25 TOOTH CRANK TRIGGER IMPREZA,FORESTER,LEGACY ALL EXCEPT CALIFORNIA SMOG
THREADED PCV TUBE, ALL MOTORS COME EGR, PLUG SUPPLIED TO MAKE NON EGR, OIL COOLER ELIMINATED EARLY HEADS LATE TIMING
THREADED PCV TUBE, ALL MOTORS COME EGR, PLUG SUPPLIED TO MAKE NON EGR, OIL COOLER ELIMINATED EARLY HEADS LATE TIMING
- New NPR Teflon Coated Hyper-eutectic Pistons
- New King Rod and Main Bearings
- New Pin Bushings
- Crank is ground and polished
- Rods are reconditioned on both ends
- Complete gasket set (including 6-Star multi-layer head gasket)
- Valves and valve guides
- New OEM timing kit installed
- New Water pump installed
- OEM Oil Pump installed
- Pre-ran on simulation test machine
- 30 month / 30,000 mile warranty
Machine Work Done:
– Engines are cleaned, all bolt holes checked and repaired if needed
– Surfaces are checked and milled
– Blocks are honed with deck plates to mimic the cylinder distortion of an assembled motor (addresses oil blow by)
– Blocks are bored and honed with a computer controlled diamond hone down to .0005″ clearance (addresses piston slap)
– Crankshaft is ground (if needed) and polished
– Deck Surface is milled on a CBN Rottler Machine
Additionally, our Long Blocks also include:
– Complete gasket set for install (including 6-Star multi-layer steel head gasket, addresses head gasket issues)
– Complete cylinder head rebuild (new guides and seals, 3 angle valve job, Delta Cams installed, OEM cam seals)
– New OEM timing kit installed
– New oil pump installed
– New water pump installed
– All Long Blocks are pre-ran on our SIM test machine to give an accurate reading of oil pressure, cylinder compression and engine load
There is a $500 refundable core deposit in addition to the purchase price, that is REQUIRED before item will ship. Some or all of your deposit will be refunded once your core is returned and inspected. OR You can ship us your engine first. Shipping is calculated as ROUND TRIP.
PLEASE CONFIRM PRODUCTION DATE AND MODEL BEFORE ORDERING TO ENSURE CORRECT FITMENT.
Please allow at least 10-14 days to build.
SHIPPING INFO: These are shipped via LTL Freight. We can ship to a commercial address or we can find terminal near you or to residential. *Must call for special residential rates; amounts can vary. (See Freight Estimates tab or call with any questions.)
Reviews
There are no reviews yet.